Tag Archives: help planning post frame building

Door Sizing Guide for Post Frame Buildings

ad

Your new post frame building is only useful when you can store and access things inside it. Doors are a critical component during the planning process. To help with planning let’s look at a door sizing guide and considerations. After all, how big the doors should be is an important consideration.

You want to allow enough space for your larger equipment, vehicles, and animals to enter and exit. Doors that are too small cause headaches, and disappointment, and add extra costs after construction is complete.

Accurate measurement and considerable foresight help with choosing door sizing, which must be nailed down before design and construction begin. Last-minute changes will likely delay the project and create added expenses.

Keep in mind that overestimating is a good strategy. After all, your future camper, boat, or tractor will likely be larger than the current ones.

Workshop, RV, or Boat Storage Entry

Storing your tall and wide RV or trailer requires a much larger entry than a standard garage door. An RV or trailer can be much taller than standard vehicles and may legally be 9 feet in width. To be safe, consider adding 2.5 to 3 feet on each side. This will allow for easier maneuverability.

When storing your boat and trailer, the height of them combined is a critical consideration. Remember, your future boat may be larger than the current one, so keep that in mind. A 12-foot width by 16-foot height door should be sufficient for a typical 24’ powerboat with an engine or a similar-sized sailboat with sails furled. Each of these has an average beam or width of about nine feet.

In any case, equipment sizes vary, so accurate height and width dimensions are vital.

Equestrian Center Entrance

The overall size of an equestrian center or horse barn will depend on how many animals you expect to board and how much equipment you will need.

As for the entryways of a horse barn, the dimensions should be tall and wide enough to allow the largest horse and the tallest rider to pass through without having to duck or stoop.

Placing an entry on each end is always a good idea to enhance ventilation and create ease of movement. If you are housing a horse trailer, you will need to allow the trailer and towing vehicle to enter and leave without too much maneuvering.

A 14’ by 14’ door at each end of your post frame horse barn should ensure easy access for horses, vehicles, and humans. You may also consider individual stable doors leading to a grassy area or arena.

Barns and Farm Buildings

Barns and other farm buildings can serve many purposes, and over time, those purposes may change.

If your post frame building should serve as a place to store equipment and perhaps a workshop for repair and service, the entryway must be sufficient to accommodate the largest pieces you want to store. Keep in mind that your future equipment may be larger, so take a liberal view when gauging doorway dimensions.

Also, ensure the approach to the access is straightforward and that unnecessary maneuvering will not be required.

Use these considerations as a door sizing guide when planning your post frame building.

Work with a Professional Post Frame Designer

Experienced professionals like those at Pacemaker Post Frame Buildings in North Webster, Indiana, have addressed these issues in hundreds of past projects.

By understanding the benefits of post frame buildings and their many uses, your professional design consultant will help to ensure that the entryways will be sufficient now and in the future.

For more information about the durability, practicality, benefits, and cost savings of a modern, beautifully designed post frame building, contact Pacemaker Post Frame Buildings. They are a long-time, family-owned designer, supplier, and builder of high-quality structures for many functions.

You can view some of Pacemaker’s many completed projects by visiting their Gallery.

To make your appointment for a consultation, complete the brief Contact Us Form or call 1-888-834-4448.

Key Steps to Building a Post Frame Structure

Post frame building

A modern, long-lasting post frame building is the best solution for almost any purpose. From concept to completion, a post frame building offers functionality, flexibility, aesthetics, and economical benefits. Let’s look at key steps to building a post frame structure

Additionally, a post frame professional can help shorten the overall building process. They do this by:

  • Creating a precise building design that fits your needs
  • Ensuring easy site preparation
  • Requiring fewer materials and less labor
  • Having appropriate materials on hand when needed
  •  An accelerated construction process

Below are the key steps to building a post frame structure.

Step 1: Identifying Your Location

Identifying the location of your future structure can be simple or complicated, depending on several factors.

  • Do you have free space to position a new structure without disrupting the current flow?
  • Will the location accommodate the estimated square footage of the building?
  • If large equipment or animals will be housed in the building, is there room for maneuvering and entry?
  • Can the building be oriented to minimize severe wind and weather forces and provide optimal airflow?
  • Have you considered future growth plans?

Step 2: Creating a Plan

Your experienced post frame professional can help ensure your building’s design will match your needs well into the future. Consider which features you would like to include in the building.

  • Total Square Footage: Determining the structure’s size depends on how you intend to use the building. If the design is for equipment storage, you should make sure there is a large enough footprint to allow for maneuvering and access. You should also have sufficient space to be able to service the equipment. Similarly, if the building is for equestrian use, make sure you have sufficient room for stalls, current and in the future. Also consider the tack room, supply storage, wash bay, and open space for saddling and unsaddling.
  • Entry and Access:  Whether the building will house animals or equipment or both, make sure the doorways and angles of access allow for ease of movement.
  • Utilities: Will you need to heat or cool all or part of the structure for comfort? Keep in mind that providing a water supply is also essential for animals and humans.
  • Loft and Storage: Creating a second-level loft or balcony for storage or even an office is easy with a post frame structure. This option is easiest to include as part of the initial design.
  • Workshop and Office: Designs can allow for a separate workshop or office with climate control and other comforts.
  • Aesthetic or Code Issues: The design must meet all local code issues for appearance and other design features.

3. Securing the Building Permit

Once you have the location, blueprint and site plan for your project, you will need to submit these to the local building authority for approval before starting the project. Your experienced post frame partner will understand all the standard requirements for your area, so this approval should be routine.

4. Site Preparation

In most instances, preparing the site for a post frame building is simply a matter of removing any vegetation from within the perimeter of the footprint and leveling the plot. Some angling will also ensure water flows away from the structure’s base. All the newly graded earth then needs to settle. This will help to create a better surface for concrete pouring, if needed.

5. Building Construction

Before the construction begins, the post frame supplier will deliver all the components to the site for assembly. The key elements, the vertical posts, will be sunk four or more feet into the ground. This ensures they are well anchored, and will also be spaced appropriately according to the design.

From that point, assembly is relatively easy. The roof trusses and horizontal support elements connect with the vertical posts to create the basic skeleton. At the same time, installation of the siding, roofing materials, windows, doors, insulation, utilities, and specified architectural features create the final structure.

Contact Pacemaker Post Frame Buildings

Pacemaker Post Frame Buildings is an industry leader in designing, manufacturing, and constructing high-quality post frame buildings in Northeast Indiana, Southwest Michigan, and Northwest Ohio. These post frame professionals are available to help with any process phase.

For more information about Pacemaker Post Frame Buildings, visit the Pacemaker website. While there, you can view some recently completed projects that might help to inspire your thoughts about a future post frame building.

If you have questions or wish to set up a meeting with a Pacemaker Post Frame expert, call +1-888-834-4448.

Why Ventilation Is Crucial for Post Frame Buildings

Post frame building surrounded by dirt and grass.

Ventilation is a critical consideration in any building construction project. Without sufficient air movement, buildings can accumulate moisture through condensation, causing mildew and mold. Left untreated this leads to wood deterioration, discoloration, and possible oxidation of machinery and other contents. Learn about ventilation for post frame buildings.

Ventilation in a building refers to the intentional exchange of moist indoor air for fresher, dryer outside air. Furthermore, without air movement, the interior atmosphere warms and increases the potential for holding moisture.

Eliminate Excess Moisture Buildup with Effective Building Design

With the help of a proven post frame building design expert, building owners can avoid unnecessary hassle and expenses that arise from ignoring the need for proper ventilation.

Engineering a system to support good air quality should be the primary criteria for any design. After all, good ventilation ensures the longevity of your post frame building.

Design Feature Considerations to Eliminate Condensation in Post Frame Buildings

Ridge Vents

Venting the top ridge of a post frame building allows rising warm, moist air inside to escape the building.

Eave Vents

Eaves and overhangs should include vents that draw cool outside air into the building. This can keep the building cooler while also creating airflow to reduce the heat and moisture levels inside.

Cupolas

A cupola or two atop your post frame building can offer architectural value and pleasing aesthetics. However, these roof structures also provide an escape route for hot, moist air. Cupolas come in many styles and can enhance the appeal of your post frame building while improving ventilation.

Gable Vents

Gable vents are typically found near the top of the roof. These provide ventilation for attics and upper levels of buildings. Moreover, they are usually placed beneath the top peaks at each end to allow cool air to enter and hot air to escape.

Doors and Windows

Doors and windows naturally offer other functions in any post frame building, but ample use of these also keeps air flowing throughout.

The essential element here is the strategic placement of the openings to allow for optimal airflow. For example, since prevailing winds tend to flow from west to east, orienting the building plus its windows and doors to take advantage of air currents is an efficient strategy. This can also help minimize your energy bills during the summer.

Exhaust Fans

Mechanical assistance is also necessary when leaving doors and windows open is not practical. An exhaust fan near vents will help remove excess moisture and odor within a post frame building. Adding ceiling fans, attic fans, and other air movers will also help keep air moving.

Other Considerations

Proper insulation is vital for minimizing energy loss and helping to maintain temperatures while promoting adequate airflow. Whether foam or batting, the insulation material must be resistant to moisture accumulation and mold or mildew development.

Consult with Pacemaker Post Frame Buildings

Every post frame structure begins with a design. Clearly, no matter where the building will be, the plan must address the destructive potential of moisture buildup, mold, and mildew. Ventilation is an important part of the design process and cannot be ignored.

The most critical first element of a successful project is to work with a professional post frame designer, manufacturer, and builder of high-quality post frame buildings.

Pacemaker Post Frame Buildings of North Webster, Indiana, has served satisfied clients for four decades. They design and build high-quality, long-lasting agricultural, equestrian, commercial, and suburban buildings. The professionals at Pacemaker provide solutions for customers throughout Northeast Indiana, Southwest Michigan, and Northwest Ohio.

For more information regarding constructing a modern, economical post frame building or upgrading an existing structure, contact the professionals at Pacemaker Post Frame Buildings at (888)-834-4448.

You can also check out Pacemaker’s vast portfolio of successful post frame projects on the Pacemaker website’s Gallery of finished structures.